CNEN=0, DPRPU=0, USBE=0, SCKE=0, DMRPU=0
System Configuration Control Register
| USBE | USB Operation Enable 0 (0): USB operation is disabled. 1 (1): USB operation is enabled. |
| Reserved | These bits are read as 00. The write value should be 00. |
| DMRPU | D- Line Resistor Control 0 (0): Pulling up the line is disabled. 1 (1): Pulling up the line is enabled. |
| DPRPU | D+ Line Resistor Control 0 (0): Pulling up the line is disabled. 1 (1): Pulling up the line is enabled. |
| Reserved | These bits are read as 000. The write value should be 000. |
| CNEN | CNEN Single End Receiver Enable 0 (0): Single end receiver operation is disabled. 1 (1): Single end receiver operation is enabled. |
| Reserved | This bit is read as 0. The write value should be 0. |
| SCKE | USB Clock Enable 0 (0): Stops supplying the clock signal to the USB. 1 (1): Enables supplying the clock signal to the USB. |
| Reserved | These bits are read as 00000. The write value should be 00000. |